Newhall Bathrooms supplies designer radiators for every setting, from traditional to futuristic. the MHS portfolio includes the finishing touches of valves, towel hangers and accessories, and pays attention to all the fine details.

• Wall brackets or feet for fixing each radiator are supplied as standard.
• All radiators are supplied with 1/2" connections: cast iron models also have an option of 3/4" connections.
• Connections are generally B.O.E (Bottom Opposite End)
• Outputs are listed in Watts at 90/70/20⁰C in accordance with EN442 with a Ãt of 60⁰C
• Note Watts X 3.412= Btu/h
• Steel models carry a 5 year guarantee, cast iron and alluminium 10 years, stainless steel for 25 years and most electrical elements for 2 years.

Water treatment...

These products are for use on closed heating systems only; they are not suitable for installation on secondary HWS cicuits.

On completion of the installation the entire system MUST be thoroughly cleaned and flushed to remove debris/flux residues etc. If a chemical cleanser is used it must be flushed from the system. Following this, the system must be dosed with a good eminence water treatment to prevent corrosion. System design , flushing and doseing must be in accordance with BS 5449:1990  BS EN12828: 2003 and BS 7593: 1992.

IMPORTANT: Failure to observe these requirements will render the guarantee on the product void.

Corrosion inhibitor must be used in accordance with the manafacturers instructions and recommendations and should take into account the particular metals within the system.